ZGF EZ Clean EC series automatic liquid filtration systems

Contact Us

Filtration Gallery

Click an image to enlarge

 

The EZ Clean series filtration systems are the most advanced, automatic, non-disposable liquid filtration systems built to meet the needs and requirements of many industries.

All EZ Clean EZ series filtration systems utilize the ZGF Spring Filter.

The EZ series features four pod designs.

• EZ100 for low flowrates
• EZ700 for applications requiring ASME Section VIII certification
• EZ700S and EZ700SLT for high performance industrial and commercial applications with flow requirements >200 gpm
• EZ900 - Our newest and most efficient design for flowrates >250 gpm.

EZ series filtration systems are used in:

• Power Generating plants,
• Automotive plants,
• Steel Mills,
• Pulp & Paper operations,
• Oil & Gas fields,
• Commercial Office Buildings
• Food Processing operations

EZ series filtration systems are utilized to filter:

• machining coolant,
• wash solutions,
• cooling / process water,
• wastewater,
• whitewater,
• surface water
• many other process fluids that are not listed above.

Simplicity, consistency, reliability, and the lowest cost of ownership make the EZ series filtration systems an ideal solution in several industries for many filtration applications for any flow requirement. We have EZ Clean EC series filtration systems processing as little as 1 gpm and our largest system has a flowrate of approximately 20,000 gpm.

EZ Clean EZ900 automatic, liquid filtration system

The EZ900 is our newest and most efficient and cost-effective liquid filtration system utilizing the ZGF Spring Filter element.

• The EZ900’s modular “pod” design is capable of meeting any flow requirement >250 gpm.
• Each “pod” houses nine (9) Spring Filter elements.
• The EZ900 design allows for 24/7 uninterrupted operation.
• The stainless-steel construction allows for use in a wide variety of applications and industries.
• The EZ900 pod is fabricated from the same building block as the Maggie MG2600.
• EZ900 system flowrate and filter element micron rating determine the required number of pods.

To see the ZGF Spring Filter in operation, click the Spring Filter animation. Click on the ZGF Spring Filter video to see how all debris is removed from the filter element during backwash when the coil opens and shimmers.

To learn even more about this innovative and best-in-class product technology, download the EZ900 Product Data Sheet. Click here for a detailed EZ900 specification sheet.   If you are looking for more information, go to Documents (link to document download section). You can download and access drawings, installation, operation & maintenance (IOM) manuals, as well as other technical and reference documents.

EZ900 materials of construction can be matched to ensure compatibility with the wide array of fluid compositions; and the EZ900 is designed for continuous service up to 190^oF and 150 psi. ZGF can provide the pods and manifolds in many materials to meet your requirements.

• Standard: 304 stainless steel
• Additional corrosion resistance: 316 stainless steel
• Most corrosion resistance: Super Duplex

Filter elements are available in the following materials.

• Standard:
  • Coil: 316 stainless steel
  • Cage: 316 stainless steel
• Additional corrosion resistance:
  • Coil: High nickel alloy
  • Cage: Super Duplex
• Most corrosion resistance:
  • Coil: High nickel alloy
  • Cage: High nickel alloy

EZ Clean EZ700 automatic, liquid filtration system

The EZ700 liquid filtration system uniquely suited for filtering Oil & Gas field fluids such as flowback water and produced water. It was designed to meet the needs and requirements of the oil & gas industry and now can be used in any application requiring pressure vessel certification.

• The EZ700’s modular “pod” design is capable of meeting any flow requirement >200 gpm.
• Each “pod” houses seven (7) Spring Filter elements.
• The EZ700 design allows for 24/7 uninterrupted operation.
• The EZ700 is manufactured to ASME Section VIII standards and meets all the stringent design and manufacturing requirements for equipment utilized in the oil & gas industry.
• EZ700 system flowrate and filter element micron rating determine the required number of pods.

To see the ZGF Spring Filter in operation, click the Spring Filter animation. Click on the ZGF Spring Filter video to see how all debris is removed from the filter element during backwash when the coil opens and shimmers.

To learn even more about this innovative and best-in-class product technology, download the EZ700 Product Data Sheet. Click here for a detailed EZ700 specification sheet. If you are looking for more information, go to Documents. You can download and access drawings, installation, operation & maintenance (IOM) manuals, as well as other technical and reference documents.

EZ700 materials of construction can be matched to ensure compatibility with the wide array of fluid compositions; and the EZ700 is designed for continuous service up to 190^oF and 192 psi. ZGF can provide the pods and manifolds in many materials to meet your requirements.

• Standard: carbon steel
• Additional corrosion resistance: Consult ZGF

Filter elements are available in the following materials.

• Standard:
  • Coil: 316 stainless steel
  • Cage: 316 stainless steel
• Additional corrosion resistance:
  • Coil: High nickel alloy
  • Cage: Super Duplex
• Most corrosion resistance:
  • Coil: High nickel alloy
  • Cage: High nickel alloy

EZ Clean EZ700S/SLT automatic, liquid filtration system

The EZ700S / EZ700SLT is the most advanced, automatic, non-disposable liquid filtration system. This best-in-class technology is ideal whenever you require removal of suspended solids, silt, grit, fines or other particulate matter from water or other water-based process fluids.

• The EZ700S’s modular “pod” design can satisfy any flow requirement >200 gpm.
• Each “pod” houses seven (7) Spring Filter elements.
• The EZ700S design allows for 24/7 uninterrupted operation.
• EZ700S system flowrate and filter element micron rating determine the required number of pods.

To see the ZGF Spring Filter in operation, click the Spring Filter animation. Click on the ZGF Spring Filter video to see how all debris is removed from the filter element during backwash when the coil opens and shimmers.

To learn even more about this innovative and best-in-class product technology, download the EZ700S Product Data Sheet. Click here for a detailed EZ700S specification sheet.  If you are looking for more information, go to Documents. You can download and access drawings, installation, operation & maintenance (IOM) manuals, as well as other technical and reference documents.

If you want to learn more about the relationship between EZ700S filter flowrate and pressure drop, then click here to view the EZ Clean EZ700S flow / pressure curves.

The EZ700S / EZ700SLT requires virtually no regular maintenance. However, should you ever need to access the Spring Filters, it’s simple. Click here to see the EZ700S Placard which shows step-by-step procedures to access the Spring Filters.

There are two pod configurations.

• EZ700SLT pod:
  • 2” inlet and outlet
  • typically used with 20 µ and 35 µ Spring Filter elements
  • used flow rate per pod is less than 135 gpm
• EZ700S pod:
  • 4” inlet and outlet
  • typically used with Spring Filter elements 50 µ and larger.

EZ700S /EZ700SLT materials of construction can be matched to ensure compatibility with the wide array of fluid compositions; and the EZ700S / EZ700SLT is designed for continuous service up to 190^oF and 120 psi. ZGF can provide the pods and manifolds in many materials to meet your requirements.

• Standard: 304 stainless steel
• Additional corrosion resistance: 316 stainless steel
• Most corrosion resistance: Super Duplex

Filter elements are available in the following materials.

• Standard:
  • Coil: 316 stainless steel
  • Cage: 316 stainless steel
• Additional corrosion resistance:
  • Coil: High nickel alloy
  • Cage: Super Duplex
• Most corrosion resistance:
  • Coil: High nickel alloyCage: High nickel alloy

Click here for to read more – EZ700S – Basic Description & Operation.

EZ Clean EZ100 automatic, liquid filtration system

The EZ100 liquid filtration system is available in either our standard industrial version or an ASME Section VIII version that is uniquely suited for refineries, chemical plants and the Oil & Gas fields.

• The EZ100’s modular “pod” houses one (1) Spring Filter element per pod.
• The EZ100 is ideal for low flow applications (1 - 50 gpm).
• The EZ100 is suitable for low pressure applications (less than 35 psi) where an external backwash source is available
• The EZ100 can be manufactured to ASME Section VIII standards.
• EZ100 system flowrate and filter element micron rating determine the required number of pods.

To see the ZGF Spring Filter in operation, click the Spring Filter animation. Click on the ZGF Spring Filter video to see how all debris is removed from the filter element during backwash when the coil opens and shimmers.

To learn even more about this innovative and best-in-class product technology, download the EZ100 Product Data Sheet. Click here for a detailed EZ100 specification sheet.  If you are looking for more information, go to Documents. You can download and access drawings, installation, operation & maintenance (IOM) manuals, as well as other technical and reference documents.

EZ100 materials of construction can be matched to ensure compatibility with the wide array of fluid compositions; and the EZ100 can be designed for continuous service up to 190oF and 192 psi. ZGF can provide the pods and manifolds in many materials to meet your requirements.

• Standard: 304 stainless steel
• Additional corrosion resistance: Consult ZGF

Filter elements are available in the following materials.

• Standard:
  • Coil: 316 stainless steel
  • Cage: 316 stainless steel
• Additional corrosion resistance:
  • Coil: High nickel alloy
  • Cage: Super Duplex
• Most corrosion resistance:
  • Coil: High nickel alloy
  • Cage: High nickel alloy

EZ MAG automatic, liquid filtration system

Some processes require both magnetic separation and a barrier filter. Your process stream may contain both magnetic and non-magnetic material, such as steel and aluminum.

Why purchase two separate systems?

The EZ MAG combines the capabilities of Maggie and EZ900 into a single system with one set of valves, one set of controls, and the footprint of a single system.

Reduce system complexity and floor space requirements and save money. The EZ MAG is the ideal solution in steel mills, tube mills and paint pre-treatment systems.

The EZMAG is the only permanent media, in-line filter that combines magnetic and barrier filtration in a single system.

Refer to Maggie and EZ900 for additional information pertaining to these two products.

EZ Clean EZ series filtration systems are available with two control options:

• Proprietary, Solid-State, Printed Circuit Board (PCB) control system – for use EZ100, 1-Pod, EZ100, 2-Pod and EZ100, 3-Pod systems. The PCB controls are housed in a NEMA 4, painted steel enclosure with a membrane keypad and LCD display that allows the user to configure timers and displays operational status. An LED stack light provides system status (i.e. power on, backwash and fault / alarm).

  The control system features three modes of backwash initiation.

  • Automatic based upon differential pressure
  • Automatic based upon time interval
  • Manual

  The ZGF PCB controls also provide some interface capability with other control systems

• Logic Module (Siemens LOGO!) – for use with any EZ Clean EZ series filtration systems. The controls are housed in a NEMA 4, painted steel enclosure or a NEMA 4X stainless steel enclosure. A door mounted user-interface allows the user to configure timers and displays operational status. An LED stack light provides system status (i.e. power on, backwash and fault / alarm).

  The control system features three modes of backwash initiation.

  • Automatic based upon differential pressure
  • Automatic based upon time interval
  • Manual

  The LOGO! controls also provide some interface capability with other control systems

Green Screen fluid recovery system saves valuable fluids

Machining coolants, metalworking fluids, quench fluids, wash solutions and many other fluids processed through ZGF EZ Clean filtration systems are extremely valuable. These fluids are expensive to purchase and expensive to treat or dispose.

Like all ZGF technology, the Green Screen:

• Requires minimal maintenance or operator interface
• Provides consistent and reliable performance
• Uses no disposable media
• Has a compact design
• Is SIMPLE, CLEVER & EFFECTIVE

Overview

• Backwash fluid from a ZGF EZ Clean filter (i.e. Phoenix, EZ700S, EZ900, EZ700, EZ100) automatic, permanent media filtration system is directed into the Green Screen.
• The Green Screen utilizes a series of baffles to encourage settling of solids into the hopper.
• The Green Screen utilizes a series of baffles to encourage settling of solids into the hopper.
• The permanent media filter panels are easily removed and cleaned, as required.
• Green Screen is a manual device.
• Green Screen is a manual device.
• Green Screen is a gravity drain device. An optional discharge pump is available.

To learn more about this simple and effective fluid recovery device, click here for a detailed Green Screen specification sheet, Green Screen Product Data Sheet or Green Screen product drawing.